Knowledgebase : Projetex > Connecting to different Projetex Servers
Q: When I try run ProjetexSwitch this errors pop-up: "General Error D204. Please, contact support.". How can I run ProjetexSwitch? A: Please make sure that all contents of ProjetexSwitch.zip (ProjetexSwitch.exe and SwithDB) have been unzipped to the sa...
Although a Projetex Workstation can connect to only one Projetex Server (i.e. one database) at a time, it is possible to connect to a different server once you log out from the current server. To be able to connect to a different server you will need t...
This error may have 2 possible causes: 1. You have selected as server a computer, on which Projetex Server is not installed. After Projetex Workstation has been started, please click the Server button and check whether the correct IP-address is entere...
In case you use another PC from your Local Area Network, click the Server button and select a LAN computer from the drop-down list (see Picture 1). In case you would like to connect to your PC via the Internet, enter the IP or domain address of your ser...
To configure your router for Projetex, please perform the following steps: 1. Assign a static IP address to the PC where the Projetex Server is installed. For this, perform all the steps described at: http://www.howtogeek.com/howto/19249/how-to-assign...
The Projetex 3D Server uses TCP ports 212 and 47111. Please make sure these ports are opened and accessible on the computer where the Projetex 3D Server is installed. You can check whether these ports are opened using the following commands on your se...